仿真出错了，问下是什么错误。
ERROR: At time1.400000000E-01 the integrator is unable to proceed.Possible Causes:(1) The accuracy required for the numerical solution can not be attained.
Relax (increase) the value of the acceptable integration ERROR.
(2) Incompatible redundant constraints, a lock up, or a bifurcation
situation.The latter two indicate a mechanism design problem.
(3) The system includes a zero (or relatively small) mass on a part with
an unconstrained translational degree of freedom.
Make sure you have mass on all parts with translational degrees of freedom.
(4) The system includes a zero (or relatively small) inertia on a part
with an unconstrained rotational degree of freedom.
Make sure you have inertias on all parts with rotational degrees of freedom.
(5) An Adams element has a function expression that equals exactly itself.
For example,
SFORCE/id1,I=id2,J=id3,ROT,FUNC=SFORCE(id1,jflag,comp,rm),and
DIFF/id4,IMPLICIT,IC=0,FUNC=DIF1(id4).
Similarly,
VARIABLE/id5, FUNC=VARVAL(id5)*TIME
equals itself at 1 second. Avoid setting an Adams element equal to itself.
ERROR: Simulation failure detected.
ERROR: Simulation failure detected.
ERROR: Simulation failure detected.
ERROR: Simulation failure detected. 应该是过约束造成的错误，你检查下约束 myh051305 发表于 2013-3-14 00:56 static/image/common/back.gif
应该是过约束造成的错误，你检查下约束
谢谢楼主解答，我看看啊，实在不行我再问你啊！！
页:
[1]