皮带仿真疑问,讨论讨论
模型里有几个皮带传送部分，建立machinery的皮带运动之后进行仿真，为什么单是运行1s,一共100步这么短都一晚上没运行一点..到底怎么回事?是模型太大了吗?同样的思路和方法,我做了个简单的demo,可以运行的. 不知道具体这个模型运行起来就不行,各位对皮udai这块有什么经验么 .如果不用这个皮带模块
建模型应该在adams中如何模拟传送带皮带转动运行起来?非常感谢..坐等大家指点..
离散的PART比较多，计算机配置高点，还是没什么问题的
ccclhm 发表于 2016-3-13 20:29
离散的PART比较多，计算机配置高点，还是没什么问题的
确实是这个问题。后面我放弃了这个方法。采用constraint的方法建立皮带，单纯考虑传动比问题。进行adams联合仿真，但是报错。。不知道什么原因。。你有想过相关经验吗？
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 218, character 180 of the macro '.amachinery.macros.mac_tem_bel_wra'.
ERROR: Location/orientation must have 3 rows, this result has 173
ERROR: The command was not executed.
ERROR: +4&> location = (eval({(.MODEL_1.pulleyset_1bprop_1.location_x.real_value),(.MODEL_1.pulleyset_1bprop_1.location_y.real_value),(.MODEL_1.pulleyset_1bprop_1.location_z.real_value)})) &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 225, character 84 of the macro '.amachinery.macros.mac_tem_bel_wra'.
ERROR: No Geometry was found because 'polyline' does not exist beneath '.MODEL_1.pulleyset_1bprop_1.carrier_part'.
ERROR: The command was not executed.
ERROR: +4>> geometry attributes geometry = .MODEL_1.pulleyset_1bprop_1.carrier_part.polyline render = wireframe
ERROR: ---------------------------------------------------------------------
页:
[1]