luodaguo023 发表于 2016-10-26 23:40:19

adams/view 异常 out of range

问题如题，各位大神帮忙看看是什么问题啊，不胜感激。问题提示如下：
WARNING:An Out-of-range X value has been used in the spline calculation.
Extrapolation is required for modeladd_1.SPLINE_1.
The X value (4.089117) should be between -15.000000 and 3.500000
WARNING:An Out-of-range X value has been used in the spline calculation.
Extrapolation is required for modeladd_1.SPLINE_1.
The X value (-15.781682) should be between -15.000000 and 3.500000
WARNING:An Out-of-range X value has been used in the spline calculation.
Extrapolation is required for modeladd_1.SPLINE_1.
The X value (-18.208447) should be between -15.000000 and 3.500000
WARNING:An Out-of-range X value has been used in the spline calculation.
Extrapolation is required for modeladd_1.SPLINE_1.
The X value (586.465024) should be between -15.000000 and 3.500000
WARNING:An Out-of-range X value has been used in the spline calculation.
Extrapolation is required for modeladd_1.SPLINE_1.
The X value (40.704941) should be between -15.000000 and 3.500000
WARNING:Additional Out-of-range warnings suppressed for modeladd_1.SPLINE_1.

luodaguo023 发表于 2016-10-26 23:56:47

提示如图

luodaguo023 发表于 2016-10-27 12:26:22

哪位大神帮我看看啊

numb3150 发表于 2016-11-14 20:22:50

spline曲线的范围太小了，改大点就行了 ，这个不影响仿真结果的 没事不用管
页: [1]
查看完整版本: adams/view 异常 out of range