[求助] 大变形过程中的mapping功能应用
最近做O型橡胶圈的大变形问题，想要用到mapping的功能。昨天晚上看了理论手册后尝试了一下，现有几个问题请大家帮帮忙！1、我不知道adina里面的mapping 是否可以多次使用，看到一些其它的软件ansys什么的都可以，我料想adina必然也是这样的。可在做的过程中第一次的重划分完成了，第二次就进行不下去。
提示：
Model errors exist - file D:\Ex01 for Adina\s3.dat has not been created.
Please resolve conditions indicated by ERROR or ALERT
messages given above.
***WARNING: No element connection for node 3282 direction 3
No element connection for node 3283 direction 3
No element connection for node 3284 direction 3
No element connection for node 3285 direction 3
No element connection for node 3286 direction 3
No element connection for node 3287 direction 3
No element connection for node 3288 direction 3
No element connection for node 3289 direction 3
No element connection for node 3290 direction 3
No element connection for node 3291 direction 3
No element connection for node 3292 direction 3
No element connection for node 3293 direction 3
No element connection for node 3294 direction 3
No element connection for node 3295 direction 3
No element connection for node 3296 direction 3
No element connection for node 3297 direction 3
No element connection for node 3298 direction 3
No element connection for node 3299 direction 3
No element connection for node 3300 direction 3
No element connection for node 3301 direction 3
No element connection for node 3302 direction 3
No element connection for node 3303 direction 3
No element connection for node 3304 direction 3
No element connection for node 3305 direction 3
No element connection for node 3306 direction 3
No element connection for node 3307 direction 3
No element connection for node 3308 direction 3
No element connection for node 3309 direction 3
No element connection for node 3310 direction 3
No element connection for node 3311 direction 3
No element connection for node 3312 direction 3
No element connection for node 3313 direction 3
No element connection for node 3314 direction 3
No element connection for node 3315 direction 3
No element connection for node 3316 direction 3
No element connection for node 3317 direction 3
No element connection for node 3318 direction 3
No element connection for node 3319 direction 3
No element connection for node 3320 direction 3
No element connection for node 3321 direction 3
No element connection for node 3322 direction 3
No element connection for node 3323 direction 3
No element connection for node 3324 direction 3
No element connection for node 3325 direction 3
No element connection for node 3326 direction 3
No element connection for node 3327 direction 3
No element connection for node 3328 direction 3
No element connection for node 3329 direction 3
No element connection for node 3330 direction 3
No element connection for node 3331 direction 3
Message limit reached - above message has been suppressed 31 times.
Nodal degrees of freedom without element
connection have been fixed for data input file.
There may still be degrees of freedom without
stiffness - see documentation.
No displacement loads generated at point 6
resulting from load application 1.
***ALERT: Constraint 1 has no nodes on master point 6. 第一步：
第二步：
第三步：
理论手册里面写到:You must use the same element types,
material models and contact conditions as you used in the
previous mesh.
这是否意味不能把单元mesh从映射划分改为自由划分呢？ 我是这样改的，因为我只是想加密局部的网格，如果局部加密了以后映射划分的话会产生网格不连续，所以就用了自由划分的。
回复 3# 的帖子
You must use the same element types。这个只是说单元类型需要一致；和网格划分的方式没有关系。 Constraint 1 has no nodes on master point 6.
我也出现过类似的问题，急需高手解决。
页:
[1]