【讨论】李军整车模型修改大全！ 欢迎补充

zhilongzhang

ARNING: The angle of the Y axis of the J marker relative
          to the X axis of I marker is 77.4960833827
          (No warnings if less than +/-90 +/-5.0)
ERROR:      A read error occurred while reading the Road Data File for
   TIRE/1.
  
   NODE coordinates were being read in when the error occurred.
  
   Line Number in File = 42.
   Iostat = 59.
ERROR:   Program Fault encountered in Solver.
请问出现如此问题怎样解决！

chanceforyou

我仿真的时候，出现：
                   error
    “  a license request for MSC.ADAMS Tire_Handling was denied.
the feature was not find!”

why?help me !!

chanceforyou

ERROR:      TYR914: ADAMS/Tire License Check Not Valid
   ID = 1
ERROR:   Abnormal termination encountered in ADAMS/Solver.

why?/?help!!

ygc2001

各位太强了，谢谢

jqliiiau

wangzx 你好:
    我照着你的提示改过了,不过驱动加的还是扭矩.出现下面的错误:
WARNING:    An anomalous situation has been detected for TIRE JEEP.TIRE_2.
   The moment arm for normal force (Fz) that causes the
   rolling resistance moment (Ty) is greater than the allowable
   maximum of 1/2 the length of the contact patch.
  
   CRR = 5.6250
   CRR_max = 1.4339
WARNING:    An anomalous situation has been detected for TIRE JEEP.TIRE_3.
   The moment arm for normal force (Fz) that causes the
   rolling resistance moment (Ty) is greater than the allowable
   maximum of 1/2 the length of the contact patch.
  
   CRR = 5.6250
   CRR_max = 0.48863
WARNING:    ADAMS has issued 4 warning(s) for the normal force moment arm
   for the rolling resistance moment.  ADAMS will no longer
   issue these warnings.
ERROR:      Problem evaluating VARIABLE JEEP.FUNCTION_Radius.
   Tried to divide by zero while evaluating its function expression.
   Divisor was 0.0. Examine the function expression to determine why a
   divide-by-zero was attempted.
ERROR:   Abnormal termination encountered in Solver.
真不知道怎么办了,你能帮帮忙吗?谢谢了!

yufly2001

真的很好阿，版主辛苦了！！

tang.x.f

水平！！！！！

tang.x.f

求助整车模型

dianhanjiqiren

请问高手，我作完所有的模型，开始仿真时，出错，而 仿真中止
ERROR:      PROPERTY_FILE_FORMAT UNDEFINED
   ID = 1
ERROR:   Abnormal termination encountered in ADAMS/Solver

请高手 这是什么错误，有什么引起，如何解决，谢谢
我的QQ：122667204

zhoushuwen

非常感谢

jiangxiwu

WARNING: The angle of the Y axis of the J marker relative
          to the X axis of I marker is 98.9428606827
          (No warnings if less than +/-90 +/-5.0)
WARNING:    JOINT JEEP.JOINT_17304578 is not specified correctly.
   The x-axis of the I marker and the y-axis of the J marker have
   a relative angle of 98.943 degrees. The angle between the axes
   should be 90 degrees.
WARNING:    JOINT JEEP.JOINT_17304578 is not specified correctly.
   The x-axis of the I marker and the y-axis of the J marker have
   a relative angle of 98.943 degrees. The angle between the axes
   should be 90 degrees.
WARNING:    An anomalous situation has been detected for TIRE JEEP.TIRE_2.
   The moment arm for normal force (Fz) that causes the
   rolling resistance moment (Ty) is greater than the allowable
   maximum of 1/2 the length of the contact patch.
  
   CRR = 5.6250
   CRR_max = 2.4849
WARNING:    An anomalous situation has been detected for TIRE JEEP.TIRE_2.
   The moment arm for normal force (Fz) that causes the
   rolling resistance moment (Ty) is greater than the allowable
   maximum of 1/2 the length of the contact patch.
  
   CRR = 5.6250
   CRR_max = 2.4849
WARNING:    An anomalous situation has been detected for TIRE JEEP.TIRE_2.
   The moment arm for normal force (Fz) that causes the
   rolling resistance moment (Ty) is greater than the allowable
   maximum of 1/2 the length of the contact patch.
  
   CRR = 5.6250
   CRR_max = 2.4849
WARNING:    An anomalous situation has been detected for TIRE JEEP.TIRE_2.
   The moment arm for normal force (Fz) that causes the
   rolling resistance moment (Ty) is greater than the allowable
   maximum of 1/2 the length of the contact patch.
  
   CRR = 5.6250
   CRR_max = 2.4849
WARNING:    ADAMS has issued 4 warning(s) for the normal force moment arm
   for the rolling resistance moment.  ADAMS will no longer
   issue these warnings.
ERROR:      Problem evaluating VARIABLE JEEP.Radius.
   Tried to divide by zero while evaluating its function expression.
   Divisor was 0.0. Examine the function expression to determine why a
   divide-by-zero was attempted.
ERROR:   Abnormal termination encountered in Solver.
我出现这样的错误,请问怎么回事?谢谢

fengyonghua2004

我的车能家motion后,能跑,不过就是过度转向!!!!
还有加上force 时,后轮会向上翘起!!
请各位师哥师姐帮忙!!!!!!

我要学adams

liuzhenquan wrote:
mryeyong:
      你好！
      我仿真时怎么轮胎的文件老有问题啊，希望你帮帮忙，你给我发一个正确的轮胎TPF文件吧，或看到信息后及时与我联系，很急，拜托了，QQ:37989397,EMAIL:liuzhenquan2003305@163.com

我也总是出现这个问题，车从来没有动过

希望也能帮我发一个，谢谢

chiyu1978@163.com