这个问题困扰了一天了求解决啊
在radioss里面做静力分析总是出现这种错误提示：材料属性都已经设置好了（图片是材料属性的设置）
************************************************************************
** **
** **
** OptiStruct 10.0 **
** **
** Design and Optimization Software **
** from Altair Engineering, Inc. **
** **
** **
** ProfessionalSP1 (Build 7601)RZN-PC **
** 2 CPU:Intel(R) Core(TM)2 Duo CPUP7350@ 2.00GHz **
** CPU speed2000 MHz **
** 932 MB RAM,4085 MB swap **
** **
** Build tag: 0466938_5333O00_Ci3242M-000 14000 **
************************************************************************
**COPYRIGHT (C) 1996-2009 Altair Engineering, Inc.**
** All Rights Reserved.Copyright notice does not imply publication. **
** Contains trade secrets of Altair Engineering, Inc. **
** Decompilation or disassembly of this software strictly prohibited. **
************************************************************************
*** OptiStruct defaults set from:
install config file: D:\Altair\hw10.0/hwsolvers/hwsolver.cfg
*** ERROR # 1237 ***
CSHEAR element number 25873 references
a missing or invalid property number 4.
*** ERROR # 1237 ***
CSHEAR element number 25874 references
a missing or invalid property number 4.
*** ERROR # 1237 ***
CSHEAR element number 25875 references
a missing or invalid property number 4.
*** ERROR # 1237 ***
CSHEAR element number 25876 references
a missing or invalid property number 4.
*** ERROR # 1237 ***
CSHEAR element number 25877 references
a missing or invalid property number 4.
*** ERROR # 1237 ***
CSHEAR element number 25878 references
a missing or invalid property number 4.
*** ERROR # 1237 ***
CSHEAR element number 25879 references
a missing or invalid property number 4.
*** ERROR # 1237 ***
CSHEAR element number 25880 references
a missing or invalid property number 4.
*** ERROR # 1237 ***
CSHEAR element number 25881 references
a missing or invalid property number 4.
*** ERROR # 1237 ***
CSHEAR element number 25882 references
a missing or invalid property number 4.
*** ERROR # 1237 ***
CSHEAR element number 25883 references
a missing or invalid property number 4.
*** ERROR # 1237 ***
CSHEAR element number 25884 references
a missing or invalid property number 4.
*** ERROR # 1237 ***
CSHEAR element number 25885 references
a missing or invalid property number 4.
*** ERROR # 1237 ***
CSHEAR element number 25886 references
a missing or invalid property number 4.
*** ERROR # 1237 ***
CSHEAR element number 25887 references
a missing or invalid property number 4.
*** ERROR # 1237 ***
CSHEAR element number 25888 references
a missing or invalid property number 4.
*** ERROR # 1237 ***
CSHEAR element number 25889 references
a missing or invalid property number 4.
*** ERROR # 1237 ***
CSHEAR element number 25890 references
a missing or invalid property number 4.
*** ERROR # 1237 ***
CSHEAR element number 25891 references
a missing or invalid property number 4.
*** More of ERROR messages # 1237 were suppressed...
*****************
Too many error messages. Aborting run.
Current limit is 10000. Use "MSGLMT" control card to change this value.
************************************************************************
Following error/warning messages appeared too many times
and were suppressed:
1237
Total of 9980 repeat error message(s) were suppressed.
To see more messages use "MSGLMT" control card in the data or config file.
求高手解答啊！模型附件
应该是属性定义有问题 本帖最后由 hanjixing 于 2012-7-17 16:21 编辑
求几何模型，改了属性还是不行，坐等高手。。。加我秋秋：270928052 共同商讨如何解决
MSGLMT 这个卡片是控制你的错误，警告，信息的数量的.默认的是1000，修改一下这个卡片的值看看 lowelljiayou 发表于 2012-7-17 18:36 static/image/common/back.gif
MSGLMT 这个卡片是控制你的错误，警告，信息的数量的.默认的是1000，修改一下这个卡片的值看看 ...
翻译谁都会啊。。 属性设置错误，楼主改下属性看看 hanjixing 发表于 2012-7-17 16:08 static/image/common/back.gif
求几何模型，改了属性还是不行，坐等高手。。。加我秋秋：270928052 共同商讨如何解决
...
是不是单元类型没有定义呢 我最后在elem type里面update一下就没有上面的问题了！ 你设置的可能是3d单元网格的属性，但你的网格是2D的就会出现这种错误，请把2d网格删除就好了 你的属性问题已经帮你解决，但是weld连接也要改，建议每个weld重新建立，或者改用rigid body 可以去看看OUT里面的具体提示
页:
[1]