整车装配出现点问题，求助下各位
WARNING: The following input communicators were not assigned during assembly:testrig.cis_max_brake_value
testrig.cis_downforce_coefficient
testrig.cis_crankshaft_ratio
testrig.cis_transmission_efficiency
testrig.cis_drive_torque_bias_front
zy_liang_front_sus.cil_ARB_pickup
zy_liang_front_sus.cir_ARB_pickup
WARNING: The following input communicators did not match with unique output communicators:
zy_powertrain.cil_tire_force
matched with:zy_liang_front_tire.col_tire_force
also matches:zy_liang_rear_tire.col_tire_force
zy_powertrain.cir_tire_force
matched with:zy_liang_front_tire.cor_tire_force
also matches:zy_liang_rear_tire.cor_tire_force
上面是有的通讯器没连上
下面是有的输入通讯器匹配了不止一个输出通讯器
下面的必须去模型里修改通讯器。。。
我的是把下面的修改没以后，上面的没管， 能动了
页:
[1]