..:: MSC专区-Adams ATV，{Simwe仿真论坛(forum.simwe.com)，CAE/CAD/CAM/，FEA/FEM/有限元分析论坛-(手机验证注册)}

hithyy 发表于 2013-12-19 12:06:30

Adams ATV

本帖最后由 hithyy 于 2013-12-19 12:07 编辑

小弟最近在做一个履带车的仿真，想用Adams的专用工具箱ATV，但是目前只在网上下到了一个adams 2010的atv，按照论坛里的方法加载，但是在Message Window里出现很多error，如下：
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 13, character 52 of the macro '.ACAR.macros.mac_int_swi_aca'.
ERROR: "acar_get_mode" is not a known constant, function or variable
ERROR:    (<<acar_get_mode>>() == "template_builder")
ERROR: The command was not executed.
ERROR: >> if condition=(acar_get_mode() == "template_builder")
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 18, character 44 of the macro '.ACAR.macros.mac_int_swi_aca'.
ERROR: "acar_get_mode" is not a known constant, function or variable
ERROR:    (<<acar_get_mode>>() != "plotting")
ERROR: The command was not executed.
ERROR: >> if condition=(acar_get_mode() != "plotting")
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 28, character 102 of the macro '.ACAR.macros.mac_int_swi_aca'.
ERROR: "acar_set_mode" is not a known constant, function or variable
ERROR:    (<<acar_set_mode>>("acar"))
ERROR: The command was not executed.
ERROR: >> variable set variable_name=.ACAR.macros.mac_int_swi_aca.acarMode integer_value=(acar_set_mode("acar"))
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 29, character 67 of the macro '.ACAR.macros.mac_int_swi_aca'.
ERROR: No Variable was found because 'acarMode' does not exist beneath '.ACAR.macros.mac_int_swi_aca'.
ERROR: The command was not executed.
ERROR: >> variable delete variable_name=.ACAR.macros.mac_int_swi_aca.acarMode
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 32, character 73 of the macro '.ACAR.macros.mac_int_swi_aca'.
ERROR: "model_class_exists" is not a known constant, function or variable
ERROR:    (eval(<<model_class_exists>>("subsystem") ? "yes" : "no"))
ERROR: The command was not executed.
ERROR: &>subsystem_exists=(eval(model_class_exists("subsystem") ? "yes" : "no")) &
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 23, character 38 of the macro '.ATV.macros.common_init'.
ERROR: "cfg_read" is not a known constant, function or variable
ERROR:    (eval(<<cfg_read>>("atv")))
ERROR: The command was not executed.
ERROR: &>integer_value=(eval(cfg_read("atv")))
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 18, character 94 of the macro '.ACAR.macros.mac_too_dat_upd'.
ERROR: "cdb_get_number_of_cdbs" is not a known constant, function or variable
ERROR:    (eval(<<cdb_get_number_of_cdbs>>()))
ERROR: The command was not executed.
ERROR: >> for variable=.ACAR.macros.mac_too_dat_upd.loopcnt start=1 end=(eval(cdb_get_number_of_cdbs()))
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 67, character 50 of the macro '.ACAR.macros.mac_too_dat_upd'.
ERROR: "cdb_get_write_default" is not a known constant, function or variable
ERROR:    (eval(<<cdb_get_write_default>>()))
ERROR: The command was not executed.
ERROR: +1&> current_choice=(eval(cdb_get_write_default()))
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 67, character 50 of the macro '.ACAR.macros.mac_too_dat_upd'.
ERROR: "cdb_get_write_default" is not a known constant, function or variable
ERROR:    (eval(<<cdb_get_write_default>>()))
ERROR: The command was not executed.
ERROR: +1&> current_choice=(eval(cdb_get_write_default()))
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 67, character 50 of the macro '.ACAR.macros.mac_too_dat_upd'.
ERROR: "cdb_get_write_default" is not a known constant, function or variable
ERROR:    (eval(<<cdb_get_write_default>>()))
ERROR: The command was not executed.
ERROR: +1&> current_choice=(eval(cdb_get_write_default()))
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 67, character 50 of the macro '.ACAR.macros.mac_too_dat_upd'.
ERROR: "cdb_get_write_default" is not a known constant, function or variable
ERROR:    (eval(<<cdb_get_write_default>>()))
ERROR: The command was not executed.
ERROR: +1&> current_choice=(eval(cdb_get_write_default()))
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 67, character 50 of the macro '.ACAR.macros.mac_too_dat_upd'.
ERROR: "cdb_get_write_default" is not a known constant, function or variable
ERROR:    (eval(<<cdb_get_write_default>>()))
ERROR: The command was not executed.
ERROR: +1&> current_choice=(eval(cdb_get_write_default()))
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 67, character 50 of the macro '.ACAR.macros.mac_too_dat_upd'.
ERROR: "cdb_get_write_default" is not a known constant, function or variable
ERROR:    (eval(<<cdb_get_write_default>>()))
ERROR: The command was not executed.
ERROR: +1&> current_choice=(eval(cdb_get_write_default()))
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 67, character 50 of the macro '.ACAR.macros.mac_too_dat_upd'.
ERROR: "cdb_get_write_default" is not a known constant, function or variable
ERROR:    (eval(<<cdb_get_write_default>>()))
ERROR: The command was not executed.
ERROR: +1&> current_choice=(eval(cdb_get_write_default()))
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 67, character 50 of the macro '.ACAR.macros.mac_too_dat_upd'.
ERROR: "cdb_get_write_default" is not a known constant, function or variable
ERROR:    (eval(<<cdb_get_write_default>>()))
ERROR: The command was not executed.
ERROR: +1&> current_choice=(eval(cdb_get_write_default()))
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 67, character 50 of the macro '.ACAR.macros.mac_too_dat_upd'.
ERROR: "cdb_get_write_default" is not a known constant, function or variable
ERROR:    (eval(<<cdb_get_write_default>>()))
ERROR: The command was not executed.
ERROR: +1&> current_choice=(eval(cdb_get_write_default()))
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 67, character 50 of the macro '.ACAR.macros.mac_too_dat_upd'.
ERROR: "cdb_get_write_default" is not a known constant, function or variable
ERROR:    (eval(<<cdb_get_write_default>>()))
ERROR: The command was not executed.
ERROR: +1&> current_choice=(eval(cdb_get_write_default()))
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 67, character 50 of the macro '.ACAR.macros.mac_too_dat_upd'.
ERROR: "cdb_get_write_default" is not a known constant, function or variable
ERROR:    (eval(<<cdb_get_write_default>>()))
ERROR: The command was not executed.
ERROR: +1&> current_choice=(eval(cdb_get_write_default()))
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 67, character 50 of the macro '.ACAR.macros.mac_too_dat_upd'.
ERROR: "cdb_get_write_default" is not a known constant, function or variable
ERROR:    (eval(<<cdb_get_write_default>>()))
ERROR: The command was not executed.
ERROR: +1&> current_choice=(eval(cdb_get_write_default()))
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 67, character 50 of the macro '.ACAR.macros.mac_too_dat_upd'.
ERROR: "cdb_get_write_default" is not a known constant, function or variable
ERROR:    (eval(<<cdb_get_write_default>>()))
ERROR: The command was not executed.
ERROR: +1&> current_choice=(eval(cdb_get_write_default()))
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 67, character 50 of the macro '.ACAR.macros.mac_too_dat_upd'.
ERROR: "cdb_get_write_default" is not a known constant, function or variable
ERROR:    (eval(<<cdb_get_write_default>>()))
ERROR: The command was not executed.
ERROR: +1&> current_choice=(eval(cdb_get_write_default()))
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 319, character 49 of the macro '.ATV.load'.
ERROR: "cfg_read" is not a known constant, function or variable
ERROR:    (eval(<<cfg_read>>("atv_aview")))
ERROR: The command was not executed.
ERROR: +1&> integer_value = (eval(cfg_read("atv_aview")))
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Invalid input. Enter a number.
ERROR: The command was not executed.
ERROR: >> var set var=.ACAR.variables.vehicle_left real=
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: Invalid input. Enter a number.
ERROR: The command was not executed.
ERROR: >> var set var=.ACAR.variables.vehicle_rear real=
ERROR: ---------------------------------------------------------------------现在还在入门，希望做过履带车仿真的前辈们能给我指点一下：
1.网上传的ATV2010好不好使，如果好使，希望能有教程？
2.如果不通过ATV来实现，在View中实现，用什么单元来模拟履带？

ln2008lww 发表于 2013-12-19 15:44:29

我感觉履带还是用RECURDYN来分析比较方便

hithyy 发表于 2013-12-26 09:31:00

ln2008lww 发表于 2013-12-19 15:44
我感觉履带还是用RECURDYN来分析比较方便

嗯，ATV走不通，只能用Recurdyn了

页: [1]

Simwe仿真论坛(forum.simwe.com)，CAE/CAD/CAM/，FEA/FEM/有限元分析论坛---(手机验证注册)'s Archiver

Adams ATV