求助！！Static equilibrium analysis has not been successful.
---- START: ERROR ----Static equilibrium analysis has not been successful.
The maximum number of iterations 75, has been reached.
For the last attempted iteration:
The equation with the largest error was model.suspension_4.ger_upper_control_arm Comp = 8 Error = 308253.766403
The variable receiving the largest increment was model.suspension_4.josfix_subframe_rigid Comp = 3 Delta = 7194.878687.
---- END: ERROR ----
Static Solution failed to converge
仿真的时候报错了，请求帮助啊！！！！
我也遇到了同样的问题，求高手解答。
---- START: ERROR ----
Static equilibrium analysis has not been successful.
The maximum number of iterations 25, has been reached.
For the last attempted iteration:
The equation with the largest error was model.suspension_1.ger_upper_control_arm Comp = 8 Error = 4354601.702576
The variable receiving the largest increment was model.suspension_1.jkrrev_lca Comp = 4 Delta = 2410266.569435.
说明无法静平衡，我也遇到这样的问题，调试了两天，才搞定，主要原因是少约束，还有空气弹簧预载荷定义有问题，后来改为自动计算，就好了。 ililing 发表于 2014-4-4 11:59
说明无法静平衡，我也遇到这样的问题，调试了两天，才搞定，主要原因是少约束，还有空气弹簧预载荷定义有问 ...
少约束？你的模型是哪里少了约束呢？？？另外，我用的也是空气弹簧，那三条曲线有什么不同吗？不明白他的含义。可以加QQ学习一下吗？？？ ililing 发表于 2014-4-4 11:59
说明无法静平衡，我也遇到这样的问题，调试了两天，才搞定，主要原因是少约束，还有空气弹簧预载荷定义有问 ...
还有，有没有可能是质量设置的问题呢？？ 我是后桥那边，我定义差速器和后桥旋转副，车轮那边也要定义和后桥连接。空气弹簧那三条线应该是指空载，半空载，满载下的刚度曲线 ililing 发表于 2014-4-5 07:49
我是后桥那边，我定义差速器和后桥旋转副，车轮那边也要定义和后桥连接。空气弹簧那三条线应该是指空载，半 ...
还是没弄清楚那三天曲线的含义呢，不去管了。 请问你这个问题是怎么解决的，我也遇到这个问题，求楼主指导
页:
[1]