wangfengyu 发表于 2007-12-18 14:27:08

我作的李军整车模型，本人是初学者，有错误请高手指点！

我作的李军整车模型，本人是初学者，有错误请高手指点！
可以实现车在road上面行驶，下面是运行时的警告，及整体模型及仿真动画
WARNING: The angle of the Y-axis of the J marker relative
          to the X-axis of I marker is 60.2432303612
          (No warnings if less than +/-90 +/-5.0)
WARNING:    JOINT model_1.JOINT_15 is not specified correctly.
   The angle between the x-axis of the I marker and the y-axis of
   the J marker is 0.0 degrees.
   The angle between the y-axis of the I marker and the x-axis of
   the J marker is 12.806 degrees.
   These angles should be of equal magnitude and opposite sign.
WARNING:    JOINT model_1.JOINT_16 is not specified correctly.
   The angle between the x-axis of the I marker and the y-axis of
   the J marker is 0.0 degrees.
   The angle between the y-axis of the I marker and the x-axis of
   the J marker is 13.181 degrees.
   These angles should be of equal magnitude and opposite sign.
WARNING:    JOINT model_1.JOINT_29 is not specified correctly.
   The x-axis of the I marker and the y-axis of the J marker have
   a relative angle of 60.243 degrees. The angle between the axes
   should be 90 degrees.
WARNING:    JOINT model_1.JOINT_15 is not specified correctly.
   The angle between the x-axis of the I marker and the y-axis of
   the J marker is 0.0 degrees.
   The angle between the y-axis of the I marker and the x-axis of
   the J marker is 12.806 degrees.
   These angles should be of equal magnitude and opposite sign.
WARNING:    JOINT model_1.JOINT_16 is not specified correctly.
   The angle between the x-axis of the I marker and the y-axis of
   the J marker is 0.0 degrees.
   The angle between the y-axis of the I marker and the x-axis of
   the J marker is 13.181 degrees.
   These angles should be of equal magnitude and opposite sign.
WARNING:    JOINT model_1.JOINT_29 is not specified correctly.
   The x-axis of the I marker and the y-axis of the J marker have
   a relative angle of 60.243 degrees. The angle between the axes
   should be 90 degrees.
WARNING:    The corrector has not converged after 6 attempts. No. of iterations = 10.
WARNING: The angle of the Y-axis of the J marker relative
          to the X-axis of I marker is 60.2432303612
          (No warnings if less than +/-90 +/-5.0)
WARNING:    JOINT model_1.JOINT_15 is not specified correctly.
   The angle between the x-axis of the I marker and the y-axis of
   the J marker is 0.0 degrees.
   The angle between the y-axis of the I marker and the x-axis of
   the J marker is 12.806 degrees.
   These angles should be of equal magnitude and opposite sign.
WARNING:    JOINT model_1.JOINT_16 is not specified correctly.
   The angle between the x-axis of the I marker and the y-axis of
   the J marker is 0.0 degrees.
   The angle between the y-axis of the I marker and the x-axis of
   the J marker is 13.181 degrees.
   These angles should be of equal magnitude and opposite sign.
WARNING:    JOINT model_1.JOINT_29 is not specified correctly.
   The x-axis of the I marker and the y-axis of the J marker have
   a relative angle of 60.243 degrees. The angle between the axes
   should be 90 degrees.
WARNING:    JOINT model_1.JOINT_15 is not specified correctly.
   The angle between the x-axis of the I marker and the y-axis of
   the J marker is 0.0 degrees.
   The angle between the y-axis of the I marker and the x-axis of
   the J marker is 12.806 degrees.
   These angles should be of equal magnitude and opposite sign.
WARNING:    JOINT model_1.JOINT_16 is not specified correctly.
   The angle between the x-axis of the I marker and the y-axis of
   the J marker is 0.0 degrees.
   The angle between the y-axis of the I marker and the x-axis of
   the J marker is 13.181 degrees.
   These angles should be of equal magnitude and opposite sign.
WARNING:    JOINT model_1.JOINT_29 is not specified correctly.
   The x-axis of the I marker and the y-axis of the J marker have
   a relative angle of 60.243 degrees. The angle between the axes
   should be 90 degrees.
WARNING:    The corrector has not converged after 6 attempts. No. of iterations = 10.

wangfengyu 发表于 2007-12-18 15:39:00

刚刚发的有点问题的现在纠正了，下面是完全按书上运动副做的，希望对大家有用！！是用adams2005做的

wangfengyu 发表于 2007-12-18 16:43:20

不好意思前面的拉了一个耦合幅

lrlr3327 发表于 2007-12-19 11:35:31

有qq吗，讨论一下

你有qq吗，我也是adams初学者，正在做李军的整车模型，请加我，请加我：qq：33265575，讨论一下

wangfengyu 发表于 2007-12-19 15:14:18

你加我msn把，公司不让上qq,zhangjj119911@hotmail.com

coldcoin 发表于 2008-2-16 09:17:15

谢谢楼主了，十分感谢

wxyygn 发表于 2009-5-13 09:51:34

cmd格式怎么打不开呀？

wxyygn 发表于 2009-5-14 14:55:56

呵呵，知道了，得导入，但导入后为什么会有许多错误呀？

baihua320 发表于 2009-10-7 00:15:33

我目前也在做这个小车，谢谢楼主了，参考一下

lit4055 发表于 2010-4-17 12:46:10

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

tonyjaa 发表于 2010-4-21 18:08:49

挺不错的，谢谢分享

拓521 发表于 2016-6-17 00:11:16

真的很不错呦~~~~~~~~~~~~~~~~~~~~

starxin 发表于 2017-11-17 16:01:12

里面好像没有轮胎文件哈
页: [1]
查看完整版本: 我作的李军整车模型，本人是初学者，有错误请高手指点！